| |
|
UBESTA (NYLON 12)
Electronics
UBESTA has superior processability characteristics to achieve smooth surfaces and stable mechanical properties, UBESTA can improve the designers satisfaction in terms of reliability, quality and durability for many different products.
Polymer
UBESTA Polyamide 12
Characteristics
Superior processability for thin wall sheating due to no gels. Excellent mechanical strength and surface hardness to prevent cables from rat and termite attacks. High flexibility, impact resistance and chemical resistance. Superior thermal and weather resistance.
Application
- Optical fibers and cables.
- Conventional cables.
- Antitermite cables.
- "Bite" resistant cables.
Properties Chart (Ubesta_Electronics_chart.pdf 299 kb)
UBESTA P3014U | 
UBESTA 3024LU |
Anti-termite resistance
UBESTA Polyamide 12 has excellent termite resistance properties, compared to other plastics. UBESTA is used as a material for jackets and sheaths for telephone and Data Communication Systems throughout the world. (from top side LDPE / UBESTA 3020LU1X3 / HDPE/PA6)
Automotives
Conformity with all international standards
Properties
UBESTA_Automotive_properties.pdf
autoBrake
Polymer
UBESTA Polyamide 12
Characteristics
- All grades complying to DIN-, ISO- and SAE-standards (SAE : A&B tubes).
- Grades with ultra low plasticizer migration available for longtime elastic memory even at elevated temperatures. Withstand the elevated operating pressure in trucks at increasing temperature requirements.
- UBESTA Polyamide 12 approved by leading car and truck manufacturers all over the world.
Application- Airbrake tubes.
- Coiled airbrake tubes.
- Diesel tubes.
- Tubes for air suspension.
- Tubes for central greasing systems.
Air Blake
UBESTA 3030JI5 3030JI9
 |  | | |
autoTank
Polymer
Modified PA 6 and modified PA 12 with excellent adhesion properties to modified PE.
Characteristics
Modified PA 6 and modified PA 12 offer much less permeation than PE in order to meet LEV II regulations (Hydrocarbon emission and fuel emission).
Support to integrate tank-related components into the tank.
High mechanical strength as well as superior impact resistance of Polyamides.
Application
Low emission fuel tank systems by hot plate welding. Components made of modified PA onto a fuel tank by utilizing modified PE as an adhesive.
autoTube
Polymer Involving all Polyamide resins of UBE Industries, Ltd., including nanocomposite technology.
Characteristics
ECOBESTA (patent pending) multilayer system is economical and ecological wellbalanced and available in conductive and non-conductive version.
New PA 12/ETFE system (patent pending) offers the lowest hydrocarbon and fuel permeation of all plastic fuel tube systems in order to meet American regulations such as LEV II.
UBESTA 3020 X 25 L is widely used for coating of metal tubes and brake lines. High viscosity grade by unique continuous polymerisation available for corrugated tube application.
Approved by leading car manufacturers.
Application
Diesel and fuel tubes. Vapor fuel tubes
Industorial
Intake Injection
Polymer
UBE Nylon 1015 GNK (PA 6 - 30% GF)
Characteristics
Excellent for injection molding - Heat resistance, surface appearance, burst pressure, adapted rheology for in-mold injection welding
Applicattion
Engine Parts
Intake Lost Core
Polymer
UBE Nylon 1015 GNK (PA 6 - 30% GF)
Characteristics
Excellent for injection molding - Heat resistance, surface appearance, burst pressure, adapted rheology for vibration Welding
Applicattion
Engine Parts
Intake Vibration
Polymer
UBE Nylon 1015 GNK (PA 6 - 30% GF)
Characteristics
Excellent for injection molding - Heat resistance, surface appearance, burst pressure, adapted rheology for easy mold- and core release.
Applicattion
Engine Parts
Life
UBESTA is being incorporated in an increasing number of consumer products in everyday use. The special properties of UBESTA are even more apparent in products that we rely on daily. UBESTA, is a material with superior qualities that are inherent in genuinely original.
UBESTA 3014U | 
UBESTA 3030XA |
Copolymer Capability
Elastomer
Polymer
UBE PAE Polyamide Elastomer
Characteristics
Available in a wide range of Shore hardnesses. High transparency and crystal clear appearance. No yellowing due to better heat stability. Low density compared to other TPE Excellent physical properties.
Application
- Articles in sport industry such like shoe soles, ski boots and profiles.
- Frames for glasses.
- Low noise gears and driving belts.
- Soft touch and high grip handles.
- Pneumatic tubes with small bending radius and good kinking resistance.
- Wheels and casters.
PAE1200U2
Film
Polymer
UBE Nylon 5034 and 7034 series. Copolyamide 6/6.6 & Copolyamide 6/12 produced using UBE's continuous polymerisation process.
Characteristics
Application
- Food packaging (shrink pack, casing, standing pouch, ...),
- Agricultural and industrial films Powder.
UBESTA 3030XA |
Powder
Polymer
UBESTA Polyamide 12
Characteristics
Average particle size of 5 °C for cosmetic applications. Perfect spherical shape due to unique polymerisation technology (patent application pending). Silk-like feeling, no streaking and no caking. Guarding additives like vitamines. Absorption of sweat and skin oil and deffered release of parfums.
Application
Make-up, eye shadow, mascara. Suncream, hand cream. Deostick and deospray.
Piping
UBESTA contributes to UTILITY transmission and distribution fields. A revolutionary plastic pipe system developed for gas industry seen in below is just one example. It is used for both buiral and for rehabilitation of existing cast iron and steel gas mains.
With excellent performance of creep and chemical resistance UBESTA supports this industry as one of the most reliable materials.
Polymer
UBESTA Polyamide 12
Characteristics
Outstanding processability of UBESTA 3035 UF even of big diameter pipes. Ultra high molecular weight Polyamide 12 utilising a unique monomer source. Reliable economical connection technology by solvent welding. Dimensional stability and excellent resistance to weather and chemical substances. Cost competitiveness due to solvent welding instead of electro fusion welding (HDPE). Increase of operating pressure due to higher pressure resistance.
Application
- Rehabilitation of corroded cast iron gas pipes.
- New installation of gas pipe systems for higher operating pressure.>
- Distribution systems with many branches which require many connections
|
 |
|
